Solid Pull Super 7 Harrow

GIVE YOUR SEED THE BEST OPPORTUNITY TO GROW.

Chopping straw, managing residue, and separating clumps help break down organic material and level your fields, creating a better seedbed for incorporating granular fertilizer or seed.

Solid Pull SUPER 7 harrow

The Solid Pull Super 7 Harrow is equipped with solid pull arms and Secure Lock, a custom hydraulic locking system, to increase the harrow's capabilities and safety. It has the same great features as past models, including the 7-bar design and three dimensions of adjustability. The 7-bar design creates up to 40% more harrowing action compared to 5-bar harrows while the three dimensions of adjustability adapt to the needs of your field. The 40-90 degrees of tine angle adjustment allows for more or less harrowing, 10 inches of vertical down pressure for how much pressure is onto the field and section angle control for ideal residue and seedbed management.

Quality starts with the little things.  the Super 7 Harrow




ONE HARROW FOR IT ALL

The Solid Pull Super 7 Harrow gives you full control to chop straw, spread residue and incorporate seed and chemicals without compromising on your field finish.




ADAPTABLE TO YOUR NEEDS

Tine Angle, Section Angle and Pitch allow you to set your aggressiveness to your desired field finish whether that is in straw or residue management or in seedbed preparation.



GET 40% MORE DONE PER PASS

The Solid Pull Super 7 Harrow with 7 bars of tines allows you to get 40% more done per pass in comparison to a 5-bar harrow.

still not sure?

request a demo to see if the super 7 is right for you

Book A Demo

Specs & Options

Super 7 – 70’

 MAXLIFE Hardened Harrow Tines – The MAX LIFE process infuses weld-embedded tungsten carbine onto the harrow tine allowing you to harrow in the toughest conditions without worrying about excessive tine wear.
A farming equipment 3D render of the Elmer's Super 7 Harrow

Specifications

Harrow Sections
7 x 7 Bar
Harrow Bar Spacing
14” (35.5cm)
Total Tines
294
Recommended Power
350+ Hp
Tine Spacing
1 7/16”
Tine Size
1/2” Diameter x 22” Long
Transport Width/Height
15’ Width x 12’10” Height
Transport Length
54’ 4”
Approximate Weight
13,000 lbs
Angle Adjust
90°- 45°
Vertical Adjust
10”
Harrow Section Roll
±5°
Hydraulic Outlets Req’d
4
Hitch Frame Construction
4” x 8” - 1/4” Wall Tube
Wing Construction
8”x8”x1/4”
Main Cart Wheels
550 / 45 - 22.5 (16 ply)
Wing/Transport Wheels
360 / 60 - 22.5 (16 ply)
Pull Arm Type
Solid Bar

45 Years Of

Modern farming demands high quality & innovative equipment

Find a Dealer
Book a Demo

Frequently Asked Questions